FR Cobot Tutorial - Unboxing

[Music]

0:099 secondsThis is the robot arm. This is the button box. This is the control box. This is the robot control box cable.

0:1515 secondsThis is the power cable. And this is the screws used to fix the robot arm. This is where the robot control box

0:2323 secondscable comes out. The bolt on the left side of the cable corresponds to the x-axis of the base coordinate. and the bolt on the right side corresponds to

0:3131 secondsthe Y direction of the base coordinate. Use an Allen key to tighten the four screws in sequence.

0:3939 secondsInstallation completed. Firstly, plug in the robot

0:4646 secondscontrol box cable and tighten it counterclockwise. Secondly, plug in and tighten the button box cable.

0:5959 secondsFinally, plug in the power cable and make sure the emergency stop button on the button box is released.

1:061 minute, 6 secondsThen you can start power up the robot.

1:091 minute, 9 secondsDuring the robot power up process, the robot end indicator light presents a cycle of red, green, and blue lights.

1:161 minute, 16 secondsWait for the indicator light to turn to green and is always on. Then you can start log in robot web app.

1:241 minute, 24 secondsFirstly, use a network cable to connect one end to the internet port of the button box and one end to

1:311 minute, 31 secondsPC. Next, open your PC's network and internet settings interface. Select Ethernet. Change adapter option. Select the connected Ethernet.

1:411 minute, 41 secondsRightclick its properties. Select IPv4 to modify. Change to

1:491 minute, 49 seconds192.168.58.x. The last digit cannot be two. Subnet mask

2:002 minutes255.255.255.0. Click to confirm and save. Then open the browser. Enter URL 1

2:102 minutes, 10 seconds192.168.58.2 to enter the robot web app interface. Login account name admin password 1 2

2:172 minutes, 17 seconds3. Then you can start operate the robot after successfully log in.