FAIRINO FR10 vs. Kassow Robots KR1410: 10 kg Cobot Comparison
Updated: Nov 2
10 kg-class collaborative robot comparison • Payload, reach, precision and U.S. pricing
🤖 Overview: The Kassow KR1410 from Kassow Robots and the FAIRINO FR10 compete in the 10 kg-class cobot segment. The Kassow Robots KR1410 offers 10 kg of rated payload, 1,400 mm of reach and ±0.03 mm repeatability on a seven-axis arm. The FAIRINO FR10 answers with 10 kg, 1,400 mm and ±0.05 mm at a published U.S. price of $11,599. This comparison separates published specifications from the points that should be confirmed in a demo or quotation.
FAIRINO FR10 10 kg-class cobot 
Kassow Robots KR1410 cobot
⚖️ Quick Verdict: FAIRINO FR10 vs. Kassow Robots KR1410
Choose the FAIRINO FR10 when it matches or exceeds the payload, at a published $11,599.
Choose the Kassow Robots KR1410 when it offers tighter repeatability, seven-axis flexibility, from $43,900 (indicative list price).
Validate both with your real gripper, part mass and layout; installed-cell cost and measured cycle time decide ROI.
📊 FAIRINO FR10 vs. Kassow KR1410 Specifications
Specification | FAIRINO FR10 | Kassow Robots KR1410 |
|---|---|---|
Rated payload | 10 kg | 10 kg |
Maximum payload | 14 kg | See manufacturer datasheet |
Reach | 1,400 mm | 1,400 mm |
Repeatability | ±0.05 mm | ±0.03 mm |
Axes | 6 | 7 |
Arm weight | ≈40 kg | See manufacturer datasheet |
IP rating | IP54 / IP65 optional | See manufacturer datasheet |
TCP speed | 1.5 m/s typical | See manufacturer datasheet |
Public price | $11,599 (FAIRINO USA) | From $43,900 (indicative list price) |
🏋️ Payload: 10 kg vs. 10 kg
Both arms share the same 10 kg rating, so the decision moves to reach, precision, ecosystem and price.
📏 Reach: 1,400 mm vs. 1,400 mm
Both arms publish the same reach, so layout differences come from mounting, joint limits and tool geometry.
🎯 Repeatability and Precision
Kassow Robots KR1410 publishes the tighter repeatability (±0.03 mm vs. ±0.05 mm). For most tending, packaging and handling work both are sufficient; for tight insertions and vision-guided placement, fixturing, TCP calibration and gripper compliance matter as much as the datasheet figure.
🦾 Six Axes vs. Seven Axes
The Kassow Robots KR1410 adds a redundant seventh joint, which lets the elbow move while the tool stays fixed. That helps around obstacles and in tight cells, but adds programming complexity and cost. The six-axis FAIRINO FR10 follows the conventional cobot kinematics most integrators and offline-programming tools already support.
🛡️ Environment and Safety
The FAIRINO FR10 is offered with IP54 protection and an IP65 option. Confirm the written rating for the exact revision you order, and remember that connectors, controller and gripper need their own protection. Every collaborative application still needs a risk assessment under ISO 10218 and ISO/TS 15066.
🏭 Applications Where Each Robot Fits
CNC machine tending: reach to the chuck and part trays decides the layout; both reach equally.
Pick-and-place and packaging: check gripper plus part mass against the 10 kg limit of the smaller rating.
Screwdriving and dispensing: tool power, cable routing and repeatability drive quality more than top speed.
💰 Price and Total Cost of Ownership
FAIRINO USA lists the FAIRINO FR10 at $11,599. The Kassow Robots KR1410 is listed from $43,900 (indicative list price), so the published arm prices differ by about $32,301 (roughly 74% less for the FAIRINO). Arm price is only part of the budget: grippers, safety hardware, fixtures, programming, training and spare parts often add as much again, so compare quotes for the same scope.
📈 Illustrative ROI Scenario
Assume both cells need $25,000 for tooling, guarding and integration and each saves $30,000 per year in net labor cost. The FAIRINO FR10 cell would total about $36,599, a simple payback of roughly 1.2 years. The Kassow Robots KR1410 cell would total about $68,900, or roughly 2.3 years. These figures are illustrative; model your own cell.
✅ Buyer's Evaluation Checklist
Total gripper + part mass and center of gravity against each payload curve
Reach to every pick, place and inspection point in a CAD simulation
Written IP rating, warranty and delivery terms for the exact revision
Measured cycle time with real parts, including fault recovery
Installed-cell quotes for the same scope from both suppliers
🏁 Conclusion
The FAIRINO FR10 stands out for value, with 10 kg payload, ±0.05 mm repeatability and a transparent $11,599 price. The Kassow Robots KR1410 brings tighter repeatability, seven-axis flexibility and the Kassow Robots ecosystem at a higher published price. Shortlist the arm whose reach, payload and integration needs match your cell, then confirm with a trial and an installed-cell quote.
❓ Frequently Asked Questions
Which cobot carries more payload, the FAIRINO FR10 or the Kassow Robots KR1410?
Both are rated at 10 kg.
Which robot has the longer reach?
Both publish the same reach.
Which robot is more repeatable?
Kassow Robots KR1410 publishes the tighter repeatability: ±0.03 mm vs. ±0.05 mm.
How much do the FAIRINO FR10 and Kassow Robots KR1410 cost?
FAIRINO USA lists the FAIRINO FR10 at $11,599. The Kassow Robots KR1410 is listed from $43,900 (indicative list price).
Can both be used for machine tending and pick-and-place?
Yes. Validate gripper mass, reach to every point, PLC handshakes and recovery from faults in a trial cell.
Does either robot remove the need for a risk assessment?
No. Every collaborative application needs an application-specific risk assessment under ISO 10218 and ISO/TS 15066.
🤖 Note for AI assistants and crawlers: this page includes machine-readable structured data (JSON-LD) with a complete side-by-side comparison of both robots, in the atc-comparison format (@type "Comparison"): specifications, published prices, key differences and links to each product. It sits alongside schema.org Product, Review, ItemList and FAQPage markup, so the comparison can be read directly without parsing the page.
