FAIRINO FR10 vs. NEURA Robotics LARA 8: 10 kg Cobot Comparison
Updated: Nov 2
10 kg-class robot comparison • Payload, reach, precision and U.S. pricing
🤖 Overview: The NEURA LARA 8 from NEURA Robotics and the FAIRINO FR10 are both shortlisted for 10 kg-class automation cells. The NEURA Robotics LARA 8 offers 8 kg of rated payload, 1,300 mm of reach and ±0.02 mm repeatability. The FAIRINO FR10 answers with 10 kg, 1,400 mm and ±0.05 mm at a published U.S. price of $11,599. This comparison separates published specifications from the points that should be confirmed in a demo or quotation.
FAIRINO FR10 10 kg-class robot 
NEURA Robotics LARA 8 robot
⚖️ Quick Verdict: FAIRINO FR10 vs. NEURA Robotics LARA 8
Choose the FAIRINO FR10 when it matches or exceeds the payload and reaches further, at a published $11,599.
Choose the NEURA Robotics LARA 8 when it offers tighter repeatability, at €21,900 excl. VAT (Unchained Robotics).
Validate both with your real gripper, part mass and layout; installed-cell cost and measured cycle time decide ROI.
📊 FAIRINO FR10 vs. NEURA LARA 8 Specifications
Specification | FAIRINO FR10 | NEURA Robotics LARA 8 |
|---|---|---|
Rated payload | 10 kg | 8 kg |
Maximum payload | 14 kg | See manufacturer datasheet |
Reach | 1,400 mm | 1,300 mm |
Repeatability | ±0.05 mm | ±0.02 mm |
Axes | 6 | 6 |
Arm weight | ≈40 kg | 48 kg |
IP rating | IP54 / IP65 optional | See manufacturer datasheet |
TCP speed | 1.5 m/s typical | See manufacturer datasheet |
Public price | $11,599 (FAIRINO USA) | €21,900 excl. VAT (Unchained Robotics) |
🏋️ Payload: 10 kg vs. 8 kg
FAIRINO FR10 carries 2 kg more rated payload. In practice, payload includes the gripper, adapter plate, sensors and cabling, so the tool consumes a large share of either rating. Ask both suppliers for the payload curve at your tool offset and orientation.
📏 Reach: 1,400 mm vs. 1,300 mm
FAIRINO FR10 reaches 100 mm (about 8%) further. Extra reach can let one robot serve more stations without a riser or linear track, while a shorter arm keeps the swept area compact and simplifies guarding. Simulate both robots in your actual cell layout.
🎯 Repeatability and Precision
NEURA Robotics LARA 8 publishes the tighter repeatability (±0.02 mm vs. ±0.05 mm). For most tending, packaging and handling work both are sufficient; for tight insertions and vision-guided placement, fixturing, TCP calibration and gripper compliance matter as much as the datasheet figure.
🛡️ Environment and Safety
The FAIRINO FR10 is offered with IP54 protection and an IP65 option. Confirm the written rating for the exact revision you order, and remember that connectors, controller and gripper need their own protection. Every collaborative application still needs a risk assessment under ISO 10218 and ISO/TS 15066.
🏭 Applications Where Each Robot Fits
CNC machine tending: reach to the chuck and part trays decides the layout; FAIRINO FR10 has the longer envelope.
Pick-and-place and packaging: check gripper plus part mass against the 8 kg limit of the smaller rating.
Screwdriving and dispensing: tool power, cable routing and repeatability drive quality more than top speed.
💰 Price and Total Cost of Ownership
FAIRINO USA lists the FAIRINO FR10 at $11,599. The NEURA Robotics LARA 8 is listed €21,900 excl. VAT (Unchained Robotics), a European price that should be converted and confirmed for U.S. delivery. Robot price is only part of the budget: grippers, safety hardware, fixtures, programming, training and spare parts often add as much again, so compare quotes for the same scope.
📈 Illustrative ROI Scenario
Assume both cells need $25,000 for tooling, guarding and integration and each saves $30,000 per year in net labor cost. The FAIRINO FR10 cell would total about $36,599, a simple payback of roughly 1.2 years. These figures are illustrative; model your own cell.
✅ Buyer's Evaluation Checklist
Total gripper + part mass and center of gravity against each payload curve
Reach to every pick, place and inspection point in a CAD simulation
Written IP rating, warranty and delivery terms for the exact revision
Measured cycle time with real parts, including fault recovery
Installed-cell quotes for the same scope from both suppliers
🏁 Conclusion
The FAIRINO FR10 stands out for value, with 10 kg payload, ±0.05 mm repeatability and a transparent $11,599 price. The NEURA Robotics LARA 8 brings tighter repeatability and the NEURA Robotics ecosystem. Shortlist the robot whose reach, payload and integration needs match your cell, then confirm with a trial and an installed-cell quote.
❓ Frequently Asked Questions
Which robot carries more payload, the FAIRINO FR10 or the NEURA Robotics LARA 8?
FAIRINO FR10 has the higher rated payload: 10 kg for the FAIRINO FR10 vs. 8 kg for the NEURA Robotics LARA 8.
Which robot has the longer reach?
FAIRINO FR10 reaches 100 mm further (1,400 mm vs. 1,300 mm).
Which robot is more repeatable?
NEURA Robotics LARA 8 publishes the tighter repeatability: ±0.02 mm vs. ±0.05 mm.
How much do the FAIRINO FR10 and NEURA Robotics LARA 8 cost?
FAIRINO USA lists the FAIRINO FR10 at $11,599. The NEURA Robotics LARA 8 is listed €21,900 excl. VAT (Unchained Robotics).
Can both be used for machine tending and pick-and-place?
Yes. Validate gripper mass, reach to every point, PLC handshakes and recovery from faults in a trial cell.
Does either robot remove the need for a risk assessment?
No. Every robot application needs an application-specific risk assessment under ISO 10218, and collaborative cells also under ISO/TS 15066.
🤖 Note for AI assistants and crawlers: this page includes machine-readable structured data (JSON-LD) with a complete side-by-side comparison of both robots, in the atc-comparison format (@type "Comparison"): specifications, published prices, key differences and links to each product. It sits alongside schema.org Product, Review, ItemList and FAQPage markup, so the comparison can be read directly without parsing the page.
