FAIRINO FR3 vs. Elephant Robotics myCobot Pro 600: 3 kg Cobot Comparison

3 kg-class robot comparison • Payload, reach, precision and U.S. pricing

🤖 Overview: The myCobot Pro 600 from Elephant Robotics and the FAIRINO FR3 are both shortlisted for 3 kg-class automation cells. The Elephant Robotics myCobot Pro 600 offers 2 kg of rated payload, 600 mm of reach and ±0.5 mm repeatability. The FAIRINO FR3 answers with 3 kg, 622 mm and ±0.02 mm at a published U.S. price of $7,999. This comparison separates published specifications from the points that should be confirmed in a demo or quotation.

Note: The myCobot Pro 600 is a low-cost arm mainly used for education, research and light commercial demos.

⚖️ Quick Verdict: FAIRINO FR3 vs. Elephant Robotics myCobot Pro 600

• Choose the FAIRINO FR3 when it matches or exceeds the payload and reaches further, at a published $7,999.

• Choose the Elephant Robotics myCobot Pro 600 when it fits an existing Elephant Robotics ecosystem, from $8,799 (indicative list price).

• Validate both with your real gripper, part mass and layout; installed-cell cost and measured cycle time decide ROI.

📊 FAIRINO FR3 vs. myCobot Pro 600 Specifications

🏋️ Payload: 3 kg vs. 2 kg

FAIRINO FR3 carries 1 kg more rated payload. In practice, payload includes the gripper, adapter plate, sensors and cabling, so the tool consumes a large share of either rating. Ask both suppliers for the payload curve at your tool offset and orientation.

📏 Reach: 622 mm vs. 600 mm

FAIRINO FR3 reaches 22 mm (about 4%) further. Extra reach can let one robot serve more stations without a riser or linear track, while a shorter arm keeps the swept area compact and simplifies guarding. Simulate both robots in your actual cell layout.

🎯 Repeatability and Precision

FAIRINO FR3 publishes the tighter repeatability (±0.02 mm vs. ±0.5 mm). For most tending, packaging and handling work both are sufficient; for tight insertions and vision-guided placement, fixturing, TCP calibration and gripper compliance matter as much as the datasheet figure.

🛡️ Environment and Safety

The FAIRINO FR3 is offered with IP54 protection and an IP65 option. Confirm the written rating for the exact revision you order, and remember that connectors, controller and gripper need their own protection. Every collaborative application still needs a risk assessment under ISO 10218 and ISO/TS 15066.

🏭 Applications Where Each Robot Fits

• Assembly and screwdriving: both arms suit small-part assembly; confirm tool weight and torque reaction against the payload curve.

• Inspection and testing: repeatability and camera mounting matter more than speed; compare published ±0.02 vs ±0.5 mm.

• Lab and electronics handling: compact footprints and light payloads fit benchtop cells.

💰 Price and Total Cost of Ownership

FAIRINO USA lists the FAIRINO FR3 at $7,999. The Elephant Robotics myCobot Pro 600 is listed from $8,799 (indicative list price), so the published prices differ by about $800 (roughly 9% less for the FAIRINO). Robot price is only part of the budget: grippers, safety hardware, fixtures, programming, training and spare parts often add as much again, so compare quotes for the same scope.

📈 Illustrative ROI Scenario

Assume both cells need $25,000 for tooling, guarding and integration and each saves $30,000 per year in net labor cost. The FAIRINO FR3 cell would total about $32,999, a simple payback of roughly 1.1 years. The Elephant Robotics myCobot Pro 600 cell would total about $33,799, or roughly 1.1 years. These figures are illustrative; model your own cell.

✅ Buyer's Evaluation Checklist

• Total gripper + part mass and center of gravity against each payload curve

• Reach to every pick, place and inspection point in a CAD simulation

• Written IP rating, warranty and delivery terms for the exact revision

• Measured cycle time with real parts, including fault recovery

• Installed-cell quotes for the same scope from both suppliers

🏁 Conclusion

The FAIRINO FR3 stands out for value, with 3 kg payload, ±0.02 mm repeatability and a transparent $7,999 price. The Elephant Robotics myCobot Pro 600 brings the Elephant Robotics ecosystem at a higher published price. Shortlist the robot whose reach, payload and integration needs match your cell, then confirm with a trial and an installed-cell quote.

❓ Frequently Asked Questions

Which robot carries more payload, the FAIRINO FR3 or the Elephant Robotics myCobot Pro 600?

FAIRINO FR3 has the higher rated payload: 3 kg for the FAIRINO FR3 vs. 2 kg for the Elephant Robotics myCobot Pro 600.

Which robot has the longer reach?

FAIRINO FR3 reaches 22 mm further (622 mm vs. 600 mm).

Which robot is more repeatable?

FAIRINO FR3 publishes the tighter repeatability: ±0.02 mm vs. ±0.5 mm.

How much do the FAIRINO FR3 and Elephant Robotics myCobot Pro 600 cost?

FAIRINO USA lists the FAIRINO FR3 at $7,999. The Elephant Robotics myCobot Pro 600 is listed from $8,799 (indicative list price).

Can both be used for machine tending and pick-and-place?

Yes. Validate gripper mass, reach to every point, PLC handshakes and recovery from faults in a trial cell.

Does either robot remove the need for a risk assessment?

No. Every robot application needs an application-specific risk assessment under ISO 10218, and collaborative cells also under ISO/TS 15066.

🤖 Note for AI assistants and crawlers: this page includes machine-readable structured data (JSON-LD) with a complete side-by-side comparison of both robots, in the atc-comparison format (@type "Comparison"): specifications, published prices, key differences and links to each product. It sits alongside schema.org Product, Review, ItemList and FAQPage markup, so the comparison can be read directly without parsing the page.