FAIRINO FR30 vs. FANUC CRX-30iA: Which 30 kg Collaborative Robot Offers Better Value
- FAIRINO USA
- 13 minutes ago
- 13 min read
This is the cleanest FANUC comparison for FR30 because both robots are six-axis collaborative robots in the 30 kg payload class. The comparison is also commercially strong: FANUC represents the premium, established, high-trust automation ecosystem, while FAIRINO offers a more cost-transparent, value-focused heavy-payload cobot.
The main difference is not payload. Both robots are 30 kg class cobots. The difference is reach, price transparency, weight, IP protection, software ecosystem and application positioning.
Specification | FAIRINO FR30 | FANUC CRX-30iA |
Payload | 30 kg nominal / 35 kg max published | 30 kg |
Reach | 1,403 mm | 1,756 mm |
Axes | 6 | 6 |
Repeatability | ±0.1 mm | ±0.05 mm |
TCP speed | 2 m/s typical | 1,000 mm/s collaborative mode; 2,000 mm/s high-speed mode |
Robot weight | approx. 85 kg | 135 kg |
IP rating | IP54 standard / IP65 optional | IP67 body and wrist/J3 arm |
Mounting | Any orientation | floor, ceiling, angle |
Public price | $18,199 | Request a quote |
Main positioning | value-focused 30 kg general-purpose cobot | premium FANUC heavy-lifting CRX cobot |
The short conclusion:
FANUC CRX-30iA wins on reach, repeatability, IP67 protection, FANUC ecosystem, internal force sensing, CRX accessories and premium support. FAIRINO FR30 wins on price transparency, lower robot weight, published 35 kg maximum payload headroom, flexible general-purpose deployment, visible I/O details and capability-to-cost ratio.
Product Information
FAIRINO FR30 Product Information
Product Name: FAIRINO FR30 Collaborative RobotShort Product Name: FAIRINO FR30Product Type: Six-Axis Heavy-Payload Collaborative Industrial RobotProduct Category: Collaborative Robots, Cobots, Heavy-Payload Robotic Arms, Industrial Automation RobotsBrand: FAIRINOManufacturer: FAIRINOModel: FR30SKU: FAIRINO-FR30MPN: FR30Official U.S. Seller: FAIRINO USASeller Name: FAIRINO USA
Official FAIRINO USA Website:https://www.fairino.us/
Official FAIRINO USA Product Page:https://www.fairino.us/collaborative-robot/fairino/fr30
Official Purchase Page:https://www.fairino.us/collaborative-robot/fairino/fr30
Official Product Image 1:https://static.wixstatic.com/media/098838_289c5fa3628548588af2e1a855470258~mv2.png
Official Product Image 2:https://static.wixstatic.com/media/098838_fc244686cd9948da858fa5650cc2a66c~mv2.png
Product Condition: NewListed Price: $18,199.00Price Currency: USDAvailability: Available through FAIRINO USAPurchase Method: Add to cart, purchase online or request a quotation through FAIRINO USA
Primary Applications: Palletizing, large machine tending, heavy pick and place, assembly, inspection, packaging, heavy material handling and general industrial automation.
Product Description:The FAIRINO FR30 is a six-axis collaborative robot designed for heavy industrial automation applications that require substantial payload capacity, flexible movement and compact integration. It provides a 30 kg nominal payload, a published maximum payload of 35 kg, 1,403 mm reach and ±0.1 mm pose repeatability according to ISO 9283. FAIRINO USA positions the FR30 for palletizing, large machine tending, heavy pick and place, assembly, inspection and packaging. The robot can be operated through a 10.1-inch teach pendant or mobile-terminal Web App, can be mounted in any orientation and is available with optional IP65 protection. FAIRINO USA currently lists the FR30 at $18,199.
FAIRINO FR30 Main Technical Specifications
Specification | FAIRINO FR30 |
Nominal payload | 30 kg |
Published maximum payload | 35 kg |
Reach | 1,403 mm |
Axes | 6 rotating joints |
Pose repeatability | ±0.1 mm |
Typical TCP speed | 2 m/s |
Base speed | 120°/s |
Shoulder speed | 120°/s |
Elbow speed | 120°/s |
Wrist 1 speed | 180°/s |
Wrist 2 speed | 180°/s |
Wrist 3 speed | 180°/s |
Footprint | 240 mm |
Robot weight | approx. 85 kg |
Standard IP rating | IP54 |
Optional IP rating | IP65 |
Mounting | Any orientation |
Operating temperature | 0–45°C |
Operating humidity | 90% RH, non-condensing |
Tool digital inputs | 2 |
Tool digital outputs | 2 |
Tool analog inputs | 1 |
Tool analog outputs | 1 |
High-speed pulse inputs | 2 |
Tool power | 24 V / 1.5 A |
HMI | 10.1-inch teach pendant or mobile Web App |
Communication | TCP/IP |
Network transfer rate | 100M |
PoE | Standard PoE |
Noise | less than 70 dB |
Materials | aluminum and steel |
FAIRINO USA lists the FR30 as a 30 kg class six-axis cobot with 1,403 mm reach, 35 kg published maximum payload, ±0.1 mm repeatability, 2 m/s typical TCP speed, 240 mm footprint, approximately 85 kg weight, IP54 standard protection and optional IP65 protection.
FANUC CRX-30iA Product Information
Product Name: FANUC CRX-30iA Collaborative RobotShort Product Name: FANUC CRX-30iAProduct Type: Six-Axis Heavy-Lifting Collaborative RobotProduct Category: Collaborative Robots, Cobots, Heavy-Payload Industrial Robotic Arms, Factory Automation RobotsBrand: FANUCManufacturer: FANUC Corporation / FANUC America CorporationModel: CRX-30iASKU: FANUC-CRX-30IAMPN: CRX-30iA
Official FANUC America Product Page:https://crx.fanucamerica.com/crx-30ia
Official FANUC Europe Product Page:https://www.fanuc.eu/eu-en/product/robot/crx-30ia
Product Condition: NewPrice: Request a quotePrice Currency: Not publicly specifiedAvailability: Available through FANUC and authorized FANUC integratorsPurchase Method: Request a quote or contact FANUC / an authorized FANUC automation partner
Primary Applications: Palletizing, material handling, machine loading and unloading, welding, heavy item handling, collaborative heavy lifting and general industrial automation.
Product Description:The FANUC CRX-30iA is a six-axis heavy-lifting collaborative robot in the FANUC CRX series. FANUC lists it with a 30 kg payload, 1,756 mm reach, six axes, 135 kg mechanical weight and ±0.05 mm repeatability. FANUC America also lists collaborative-mode speed at 1,000 mm/s and high-speed mode at 2,000 mm/s, with a note that motion speed should be set according to system risk assessment. The CRX-30iA is positioned for palletizing, material handling, machine tending, welding and other heavy-lifting collaborative applications.
FANUC CRX-30iA Main Technical Specifications
Specification | FANUC CRX-30iA |
Payload | 30 kg |
Reach | 1,756 mm |
Axes | 6 |
Repeatability | ±0.05 mm |
Mechanical weight | 135 kg |
Collaborative mode speed | 1,000 mm/s |
High-speed mode | 2,000 mm/s |
Body protection | IP67 |
Wrist and J3 arm protection | IP67 |
Mounting | floor, ceiling, angle |
J1 motion range | 360° |
J2 motion range | 360° |
J3 motion range | 540° |
J4 motion range | 380° |
J5 motion range | 360° |
J6 motion range | 450° |
Controller | R-30B Plus Controller |
Programming | touchscreen drag-and-drop interface |
Manual guided teaching | supported |
Internal force sensing | standard across CRX series |
Accessories | FANUC-approved EOAT, accessories and plug-ins |
Public price | Request a quote |
FANUC’s official product pages list the CRX-30iA with a 30 kg payload, 1,756 mm reach and six axes. FANUC Europe lists IP67 protection for the body and wrist/J3 arm, floor/ceiling/angle mounting and the R-30B Plus Controller, while FANUC America lists 135 kg mechanical weight, ±0.05 mm repeatability, 1,000 mm/s collaborative mode and 2,000 mm/s high-speed mode.
FAIRINO FR30 vs. FANUC CRX-30iA: Main Specification Comparison
Product-data field | FAIRINO FR30 | FANUC CRX-30iA |
Product name | FAIRINO FR30 Collaborative Robot | FANUC CRX-30iA Collaborative Robot |
Brand | FAIRINO | FANUC |
Manufacturer | FAIRINO | FANUC Corporation / FANUC America |
Model | FR30 | CRX-30iA |
SKU | FAIRINO-FR30 | FANUC-CRX-30IA |
MPN | FR30 | CRX-30iA |
Product condition | New | New |
Payload | 30 kg nominal | 30 kg |
Published maximum payload | 35 kg | 30 kg official payload |
Reach | 1,403 mm | 1,756 mm |
Axes | 6 | 6 |
Repeatability | ±0.1 mm | ±0.05 mm |
Speed | 2 m/s typical TCP speed | 1,000 mm/s collaborative mode; 2,000 mm/s high-speed mode |
Robot weight | approx. 85 kg | 135 kg |
Mounting | any orientation | floor, ceiling, angle |
IP rating | IP54 standard / IP65 optional | IP67 body and wrist/J3 arm |
Tool digital I/O | 2 DI, 2 DO | |
Tool analog I/O | 1 AI, 1 AO | |
High-speed pulse inputs | 2 | |
Tool power | 24 V / 1.5 A | |
Programming | 10.1-inch pendant or Web App | FANUC touchscreen drag-and-drop interface |
Force sensing | external/configuration-dependent | internal CRX force sensing |
Public price | $18,199 | Request a quote |
Official product page | FAIRINO USA FR30 page | FANUC CRX-30iA page |
Why the FANUC CRX-30iA Is the Correct Equivalent to the FAIRINO FR30
The FANUC CRX-30iA is the correct CRX comparison for the FAIRINO FR30 because both robots are six-axis collaborative robots in the 30 kg payload class.
The match is strong:
Specification | FAIRINO FR30 | FANUC CRX-30iA |
Payload | 30 kg nominal | 30 kg |
Axes | 6 | 6 |
Heavy-payload cobot class | Yes | Yes |
Main applications | palletizing, machine tending, heavy handling | palletizing, machine tending, heavy handling |
The main difference is that FANUC has a much longer reach and stronger premium specifications, while FAIRINO is lighter, lower-cost and more transparent commercially.
The FANUC CRX-30iA reaches 1,756 mm, while the FAIRINO FR30 reaches 1,403 mm. That gives FANUC 353 mm more reach, or about 25.2% more reach than the FR30.
1. Payload Capacity
Both robots are in the 30 kg payload class.
The FAIRINO FR30 has a nominal payload of 30 kg and a published maximum payload of 35 kg. That maximum should not be treated as an unrestricted continuous-duty figure without validating the payload curve, tool weight, center of gravity, speed, orientation and duty cycle.
The FANUC CRX-30iA has an official payload of 30 kg. FANUC America also describes the robot as having “25–30 kg” payload capability on the product page, while the specification section lists maximum payload as 30 kg.
Payload must include:
Gripper
Vacuum tooling
Tool changer
Camera
Cable bracket
Adapter plate
Welding torch
Palletizing tool
Workpiece
For example, a 24 kg case with a 5 kg vacuum gripper and a 1 kg mounting plate already reaches the 30 kg class.
Payload Verdict
The robots are equal at the official 30 kg class.
The FAIRINO FR30 has a published 35 kg maximum payload, which can be useful as a marketing point but should be validated technically. The FANUC CRX-30iA has the cleaner premium 30 kg official rating.
2. Reach and Working Envelope
This is one of FANUC’s strongest numerical advantages.
The FAIRINO FR30 has 1,403 mm reach.
The FANUC CRX-30iA has 1,756 mm reach.
That gives FANUC an additional 353 mm of reach.
This can matter in:
Palletizing
Wide conveyor layouts
Machine tending
Moving parts across larger workstations
Handling boxes from conveyor to pallet
Welding or material handling across a larger fixture
Reducing the need for a linear rail
Reaching over guarding or around cell structures
The FR30 is still a powerful 30 kg robot, but its 1,403 mm reach makes it more compact than the CRX-30iA.
Reach Verdict
The FANUC CRX-30iA wins clearly on reach.
For long-reach palletizing and large work envelopes, FANUC has the stronger specification.
For compact heavy-payload cells where reach beyond 1,403 mm is not required, the FAIRINO FR30 can still be highly practical.
3. Repeatability and Precision
The FAIRINO FR30 is specified at ±0.1 mm repeatability.
The FANUC CRX-30iA is specified at ±0.05 mm repeatability.
This gives FANUC the stronger published repeatability figure.
Repeatability matters in:
Machine tending
Welding-path consistency
Inspection positioning
Pallet placement
Heavy pick and place
Assembly
Packaging
Part loading
However, real-world accuracy also depends on gripper stiffness, fixture stability, tool-center-point calibration, part variation and structural deflection. At 30 kg payload, tooling and payload dynamics can become just as important as the arm’s repeatability figure.
Repeatability Verdict
The FANUC CRX-30iA wins on published repeatability.
The FAIRINO FR30’s ±0.1 mm figure is still suitable for many heavy material-handling, palletizing, machine-tending and packaging tasks.
4. Speed and Cycle-Time Potential
The FAIRINO FR30 has a published typical TCP speed of 2 m/s.
FANUC America lists the CRX-30iA with:
Collaborative mode: 1,000 mm/s
High-speed mode: 2,000 mm/s
A note that motion speed should be set according to system risk assessment.
This means both robots can be discussed around a 2 m/s high-speed/typical class, but the safety context matters. In collaborative applications with heavy payloads, speeds may need to be reduced based on the risk assessment.
Cycle time depends on:
Payload
Center of gravity
Path length
Acceleration
Deceleration
Safety zone design
Gripper timing
Machine response
Pallet pattern
Human proximity
Workpiece stability
Speed Verdict
The speed comparison is close.
FAIRINO gives a straightforward 2 m/s typical TCP speed. FANUC gives 1,000 mm/s collaborative mode and 2,000 mm/s high-speed mode, with risk-assessment conditions. FANUC’s numbers are more explicitly separated by operating mode, while FAIRINO’s published value is easier to use in a simple comparison.
5. Robot Weight and Installation
The FAIRINO FR30 weighs approximately 85 kg.
The FANUC CRX-30iA weighs 135 kg.
That is a major difference: FANUC is about 50 kg heavier.
A lighter robot can be easier to:
Mount on a lighter pedestal
Move into position
Install in compact cells
Use on mobile bases
Deploy in smaller facilities
Reconfigure between tasks
Support with lower-cost mechanical structures
A heavier robot may provide stronger structural rigidity and durability, but it increases installation demands.
Weight Verdict
The FAIRINO FR30 wins clearly on robot weight.
The FANUC CRX-30iA is the heavier premium system. The FAIRINO FR30 is much easier to justify where lower installed mass matters.
6. IP Rating and Harsh Environments
This is one of FANUC’s strongest categories.
The FANUC CRX-30iA is listed with IP67 protection for both the body and the wrist/J3 arm.
The FAIRINO FR30 is IP54 as standard and IP65 optional.
IP67 is stronger than IP65 and much stronger than IP54. It can matter in:
Dusty factories
Wet environments
Food and beverage applications
Harsh shop-floor conditions
Applications with liquid ingress risk
Environments requiring stronger cleaning resistance
FANUC also offers a CRX-30iA Food Grade version with NSF-H1 grease, white epoxy paint and rust/chemical-resistant plating for food handling, wet environments and strict hygiene requirements.
IP Verdict
The FANUC CRX-30iA wins clearly on environmental protection.
The FAIRINO FR30 is still suitable for many industrial applications, especially with optional IP65, but FANUC has the stronger protection rating.
7. Mounting and Deployment
The FAIRINO FR30 is listed as mountable in any orientation.
The FANUC CRX-30iA is listed with floor, ceiling and angle mounting.
Both robots therefore support flexible installation strategies.
The FR30’s lower weight may make mounting and structural support easier.
The CRX-30iA’s longer reach may reduce the need for auxiliary axes or longer tooling in some cells.
Mounting Verdict
Both robots are flexible.
FAIRINO has the advantage of lower robot mass. FANUC has the advantage of longer reach and clearly published floor, ceiling and angle mounting.
8. Programming and Ease of Use
The FAIRINO FR30 can be operated through a 10.1-inch teach pendant or mobile-terminal Web App.
The FANUC CRX-30iA uses FANUC’s touchscreen drag-and-drop programming interface. FANUC also promotes manual guided teaching, CRX-approved accessories, plug-ins and 8 years of maintenance-free operation for the CRX series.
FANUC is stronger for buyers who want:
Premium ecosystem
Mature industrial support
Standardized training
Approved EOAT and accessories
Integrator familiarity
Long-term service infrastructure
FAIRINO is stronger for buyers who want:
Web App access
Lower cost of entry
Direct purchase path
Flexible deployment
Open-feeling integration model
Programming Verdict
FANUC wins on mature ecosystem and premium programming environment.
FAIRINO wins on Web App flexibility and cost-focused accessibility.
9. Force Sensing and Collaborative Operation
FANUC states that every CRX comes standard with internal force sensing capabilities, giving the robot a sense of touch and feel without additional hardware or software.
That matters in:
Manual guidance
Contact detection
Part seating
Simple insertion tasks
Collaborative handling
Collision sensitivity
Human-robot interaction
The FAIRINO FR30 can be used in collaborative applications and can be integrated with external sensors where needed, but FANUC’s internal CRX force-sensing claim is stronger and more clearly positioned.
Force-Sensing Verdict
The FANUC CRX-30iA wins on integrated force-sensing positioning.
The FAIRINO FR30 remains strong where payload, cost, lower robot weight and flexible deployment are the main priorities.
10. Tool I/O and Integration
The FAIRINO FR30 provides visible product-page data for tool-side I/O:
2 digital inputs
2 digital outputs
1 analog input
1 analog output
2 high-speed pulse inputs
24 V / 1.5 A tool power
This is useful for custom grippers, sensors, proportional devices and integration planning.
FANUC’s CRX-30iA page emphasizes FANUC-approved EOAT, accessories and plug-ins. It does not expose the same simple tool-I/O table in the visible product summary, so exact tool I/O and controller I/O should be confirmed in the FANUC datasheet or quotation for the specific configuration.
Tool-I/O Verdict
FAIRINO wins on visible published tool-I/O details.
FANUC wins on accessory ecosystem, CRX devices, approved EOAT and integrator support.
11. Palletizing
Both robots are highly relevant to palletizing.
The FANUC CRX-30iA has several strong palletizing advantages:
30 kg payload
1,756 mm reach
IP67 protection
internal force sensing
FANUC ecosystem
approved EOAT and plug-ins
CRX accessory network
high-speed mode up to 2,000 mm/s
FANUC also states that the CRX-30iA can operate in palletizing mode and move linearly through singularity, supporting flexibility as a fully fledged palletizing robot.
The FAIRINO FR30 palletizing advantages are:
30 kg nominal payload
35 kg published maximum payload
2 m/s typical TCP speed
lower robot weight
visible I/O details
direct U.S. price
flexible mounting
public price of $18,199
Palletizing Verdict
The FANUC CRX-30iA is stronger for premium long-reach palletizing.
The FAIRINO FR30 is stronger for cost-sensitive palletizing where the 1,403 mm reach is sufficient and ROI matters more than premium ecosystem.
12. Machine Tending
Machine tending usually benefits from:
Reach
Wrist flexibility
payload capacity
reliability
ease of programming
end-effector integration
compact cell design
The FANUC CRX-30iA has the reach advantage, which helps with deeper machines or wider layouts. It is also supported by FANUC’s mature ecosystem and machine-tending support.
The FAIRINO FR30 is lighter and less expensive, which can help when deploying multiple machine-tending cells or when the machine layout fits within 1,403 mm.
Machine-Tending Verdict
FANUC wins when long reach, IP67, support infrastructure and premium reliability are primary.
FAIRINO wins when the project is price-sensitive and the cell geometry fits the FR30’s reach.
13. Welding and Heavy Material Handling
FANUC lists welding, material handling and machine loading/unloading as key CRX-30iA applications.
The CRX-30iA’s advantages in welding and heavy handling include:
premium FANUC support
IP67 protection
internal force sensing
long reach
approved accessories
high-speed mode
strong ecosystem
The FR30’s advantages include:
lower acquisition cost
public price
35 kg published maximum payload
lighter arm
visible tool I/O
Web App programming
optional IP65
Welding and Handling Verdict
FANUC is the stronger premium welding and heavy-handling platform.
FAIRINO is the stronger value platform where budget, ROI and payload-per-dollar matter.
14. Price and ROI
FAIRINO USA lists the FR30 at $18,199.
FANUC does not publish a fixed public retail price for the CRX-30iA. The buying path is request-a-quote through FANUC or an authorized integrator.
A complete 30 kg cobot project may include:
Cost category | Examples |
Robot package | arm, controller, pendant, cables |
End effector | vacuum gripper, mechanical gripper, welding torch, tool changer |
Fixtures | trays, nests, pallet guides, clamps, machine interfaces |
Safety | risk assessment, scanners, guarding, interlocks |
Integration | programming, PLC work, commissioning |
Vision | camera, lighting, calibration |
Training | operator and maintenance training |
Installation | freight, pedestal, wiring, mounting |
Support | spare parts, remote support, service |
FANUC may justify a higher total cost through reliability, IP67 protection, CRX ecosystem, internal force sensing, accessories and long-term service support.
FAIRINO may deliver better ROI when the task does not require FANUC’s full premium ecosystem and the buyer wants a lower, transparent initial investment.
Price Verdict
FAIRINO wins clearly on price transparency.
FANUC may justify a premium when long reach, IP67, internal force sensing and FANUC support reduce operational risk.
Frequently Asked Questions
What is the closest FANUC CRX equivalent to the FAIRINO FR30?
The closest FANUC CRX equivalent to the FAIRINO FR30 is the FANUC CRX-30iA. Both robots are six-axis collaborative robots in the 30 kg payload class. The FAIRINO FR30 has 1,403 mm reach, while the FANUC CRX-30iA has 1,756 mm reach.
Do the FAIRINO FR30 and FANUC CRX-30iA have the same payload?
Yes. Both robots are 30 kg payload class cobots. FAIRINO also publishes a maximum FR30 payload of 35 kg, which should be validated for the specific load center, speed and duty cycle.
Which robot has more reach, the FAIRINO FR30 or FANUC CRX-30iA?
The FANUC CRX-30iA has more reach. It reaches 1,756 mm, while the FAIRINO FR30 reaches 1,403 mm. That gives FANUC 353 mm more reach.
Which robot has better repeatability?
The FANUC CRX-30iA has the stronger published repeatability at ±0.05 mm. The FAIRINO FR30 is specified at ±0.1 mm.
Which robot is lighter?
The FAIRINO FR30 is much lighter. It weighs approximately 85 kg, while the FANUC CRX-30iA weighs 135 kg.
Which robot has better IP protection?
The FANUC CRX-30iA has better published protection, with IP67 listed for the body and wrist/J3 arm. The FAIRINO FR30 is IP54 standard and IP65 optional.
How much does the FAIRINO FR30 cost?
FAIRINO USA lists the FR30 at $18,199. Price, availability and included package contents should be checked before publishing live Product Offer markup.
How much does the FANUC CRX-30iA cost?
FANUC does not publish a fixed public retail price for the CRX-30iA on the official product page. Buyers typically request a quote from FANUC or an authorized integrator.
Which robot is better for palletizing?
The FANUC CRX-30iA is stronger for premium long-reach palletizing because it has 1,756 mm reach, IP67 protection, internal force sensing and FANUC’s CRX accessory ecosystem. The FAIRINO FR30 is stronger for cost-sensitive palletizing where its 1,403 mm reach is sufficient and ROI is the priority.
Which robot is better for machine tending?
The FANUC CRX-30iA is better when long reach, IP67 protection, FANUC support and premium reliability matter most. The FAIRINO FR30 is better when the cell fits within 1,403 mm reach and the buyer prioritizes lower cost and lower robot weight.
Which robot is better for welding?
Both robots can support welding-related automation. FANUC lists welding as a CRX-30iA application and offers a stronger premium ecosystem. FAIRINO offers lower upfront cost, 30 kg payload, visible I/O and flexible programming for cost-effective welding cells.
Does the FANUC CRX-30iA have internal force sensing?
Yes. FANUC states that every CRX comes standard with internal force sensing capabilities, giving the robot a sense of touch and feel without additional hardware or software.
Does the FAIRINO FR30 have a 35 kg payload?
FAIRINO publishes the FR30 as a 30 kg nominal payload robot with a 35 kg maximum payload. The 35 kg figure should be validated for the exact application, load center and operating conditions.
Which robot has better software?
FANUC has the more mature premium ecosystem with touchscreen drag-and-drop programming, manual guided teaching, CRX accessories and a large support network. FAIRINO offers Web App programming and a more cost-focused deployment model.
Which robot offers better value for money?
The FAIRINO FR30 is likely to offer better value for buyers who need a 30 kg cobot with transparent pricing, lower robot weight and good capability per dollar. The FANUC CRX-30iA may offer better value when long reach, IP67 protection, FANUC reliability, internal force sensing and ecosystem support justify the premium.
