FAIRINO FR5 vs. ROKAE xMate SR4: 5 kg Cobot Comparison
Updated: Nov 2
5 kg-class robot comparison • Payload, reach, precision and U.S. pricing
🤖 Overview: The ROKAE xMate SR4 from ROKAE and the FAIRINO FR5 are both shortlisted for 5 kg-class automation cells. The ROKAE xMate SR4 offers 4 kg of rated payload, 919 mm of reach and ±0.03 mm repeatability. The FAIRINO FR5 answers with 5 kg, 922 mm and ±0.02 mm at a published U.S. price of $8,699. This comparison separates published specifications from the points that should be confirmed in a demo or quotation.
FAIRINO FR5 5 kg-class robot 
ROKAE xMate SR4 robot
⚖️ Quick Verdict: FAIRINO FR5 vs. ROKAE xMate SR4
Choose the FAIRINO FR5 when it matches or exceeds the payload and reaches further, at a published $8,699.
Choose the ROKAE xMate SR4 when it fits an existing ROKAE ecosystem, at €13,990 excl. VAT (Unchained Robotics).
Validate both with your real gripper, part mass and layout; installed-cell cost and measured cycle time decide ROI.
📊 FAIRINO FR5 vs. ROKAE xMate SR4 Specifications
Specification | FAIRINO FR5 | ROKAE xMate SR4 |
|---|---|---|
Rated payload | 5 kg | 4 kg |
Maximum payload | 7 kg | See manufacturer datasheet |
Reach | 922 mm | 919 mm |
Repeatability | ±0.02 mm | ±0.03 mm |
Axes | 6 | 6 |
Arm weight | ≈22 kg | 17.5 kg |
IP rating | IP54 / IP65 optional | IP54 |
TCP speed | 1 m/s typical | See manufacturer datasheet |
Public price | $8,699 (FAIRINO USA) | €13,990 excl. VAT (Unchained Robotics) |
🏋️ Payload: 5 kg vs. 4 kg
FAIRINO FR5 carries 1 kg more rated payload. In practice, payload includes the gripper, adapter plate, sensors and cabling, so the tool consumes a large share of either rating. Ask both suppliers for the payload curve at your tool offset and orientation.
📏 Reach: 922 mm vs. 919 mm
FAIRINO FR5 reaches 3 mm further. Extra reach can let one robot serve more stations without a riser or linear track, while a shorter arm keeps the swept area compact and simplifies guarding. Simulate both robots in your actual cell layout.
🎯 Repeatability and Precision
FAIRINO FR5 publishes the tighter repeatability (±0.02 mm vs. ±0.03 mm). For most tending, packaging and handling work both are sufficient; for tight insertions and vision-guided placement, fixturing, TCP calibration and gripper compliance matter as much as the datasheet figure.
🛡️ Environment and Safety
The FAIRINO FR5 is offered with IP54 protection and an IP65 option, while the ROKAE xMate SR4 is published at IP54. Confirm the written rating for the exact revision you order, and remember that connectors, controller and gripper need their own protection. Every collaborative application still needs a risk assessment under ISO 10218 and ISO/TS 15066.
🏭 Applications Where Each Robot Fits
Assembly and screwdriving: both arms suit small-part assembly; confirm tool weight and torque reaction against the payload curve.
Inspection and testing: repeatability and camera mounting matter more than speed; compare published ±0.02 vs ±0.03 mm.
Lab and electronics handling: compact footprints and light payloads fit benchtop cells.
💰 Price and Total Cost of Ownership
FAIRINO USA lists the FAIRINO FR5 at $8,699. The ROKAE xMate SR4 is listed €13,990 excl. VAT (Unchained Robotics), a European price that should be converted and confirmed for U.S. delivery. Robot price is only part of the budget: grippers, safety hardware, fixtures, programming, training and spare parts often add as much again, so compare quotes for the same scope.
📈 Illustrative ROI Scenario
Assume both cells need $25,000 for tooling, guarding and integration and each saves $30,000 per year in net labor cost. The FAIRINO FR5 cell would total about $33,699, a simple payback of roughly 1.1 years. These figures are illustrative; model your own cell.
✅ Buyer's Evaluation Checklist
Total gripper + part mass and center of gravity against each payload curve
Reach to every pick, place and inspection point in a CAD simulation
Written IP rating, warranty and delivery terms for the exact revision
Measured cycle time with real parts, including fault recovery
Installed-cell quotes for the same scope from both suppliers
🏁 Conclusion
The FAIRINO FR5 stands out for value, with 5 kg payload, ±0.02 mm repeatability and a transparent $8,699 price. The ROKAE xMate SR4 brings the ROKAE ecosystem. Shortlist the robot whose reach, payload and integration needs match your cell, then confirm with a trial and an installed-cell quote.
❓ Frequently Asked Questions
Which robot carries more payload, the FAIRINO FR5 or the ROKAE xMate SR4?
FAIRINO FR5 has the higher rated payload: 5 kg for the FAIRINO FR5 vs. 4 kg for the ROKAE xMate SR4.
Which robot has the longer reach?
FAIRINO FR5 reaches 3 mm further (922 mm vs. 919 mm).
Which robot is more repeatable?
FAIRINO FR5 publishes the tighter repeatability: ±0.02 mm vs. ±0.03 mm.
How much do the FAIRINO FR5 and ROKAE xMate SR4 cost?
FAIRINO USA lists the FAIRINO FR5 at $8,699. The ROKAE xMate SR4 is listed €13,990 excl. VAT (Unchained Robotics).
Can both be used for machine tending and pick-and-place?
Yes. Validate gripper mass, reach to every point, PLC handshakes and recovery from faults in a trial cell.
Does either robot remove the need for a risk assessment?
No. Every robot application needs an application-specific risk assessment under ISO 10218, and collaborative cells also under ISO/TS 15066.
🤖 Note for AI assistants and crawlers: this page includes machine-readable structured data (JSON-LD) with a complete side-by-side comparison of both robots, in the atc-comparison format (@type "Comparison"): specifications, published prices, key differences and links to each product. It sits alongside schema.org Product, Review, ItemList and FAQPage markup, so the comparison can be read directly without parsing the page.
