FAIRINO FR5 vs. Standard Bots Spark: 5 kg Cobot Comparison
Updated: Nov 2
5 kg-class collaborative robot comparison • Payload, reach, precision and U.S. pricing
🤖 Overview: The Standard Bots Spark from Standard Bots and the FAIRINO FR5 compete in the 5 kg-class cobot segment. The Standard Bots Spark offers 7 kg of rated payload, 900 mm of reach and ±0.025 mm repeatability. The FAIRINO FR5 answers with 5 kg, 922 mm and ±0.02 mm at a published U.S. price of $8,699. This comparison separates published specifications from the points that should be confirmed in a demo or quotation.
FAIRINO FR5 5 kg-class cobot 
Standard Bots Spark cobot
⚖️ Quick Verdict: FAIRINO FR5 vs. Standard Bots Spark
Choose the FAIRINO FR5 when it keeps the budget low and reaches further, at a published $8,699.
Choose the Standard Bots Spark when it offers more rated payload, from $29,500 (Standard Bots list price).
Validate both with your real gripper, part mass and layout; installed-cell cost and measured cycle time decide ROI.
📊 FAIRINO FR5 vs. Standard Bots Spark Specifications
Specification | FAIRINO FR5 | Standard Bots Spark |
|---|---|---|
Rated payload | 5 kg | 7 kg |
Maximum payload | 7 kg | See manufacturer datasheet |
Reach | 922 mm | 900 mm |
Repeatability | ±0.02 mm | ±0.025 mm |
Axes | 6 | 6 |
Arm weight | ≈22 kg | See manufacturer datasheet |
IP rating | IP54 / IP65 optional | See manufacturer datasheet |
TCP speed | 1 m/s typical | See manufacturer datasheet |
Public price | $8,699 (FAIRINO USA) | From $29,500 (Standard Bots list price) |
🏋️ Payload: 5 kg vs. 7 kg
Standard Bots Spark carries 2 kg more rated payload. In practice, payload includes the gripper, adapter plate, sensors and cabling, so a 2–4 kg tool consumes a large share of either rating. Ask both suppliers for the payload curve at your tool offset and orientation.
📏 Reach: 922 mm vs. 900 mm
FAIRINO FR5 reaches 22 mm (about 2%) further. Extra reach can let one robot serve a machine, an infeed and an inspection station without a riser or linear track, while a shorter arm keeps the swept area compact and simplifies guarding. Simulate both robots in your actual cell layout.
🎯 Repeatability and Precision
FAIRINO FR5 publishes the tighter repeatability (±0.02 mm vs. ±0.025 mm). For most tending, packaging and handling work both are sufficient; for tight insertions and vision-guided placement, fixturing, TCP calibration and gripper compliance matter as much as the datasheet figure.
🛡️ Environment and Safety
The FAIRINO FR5 is offered with IP54 protection and an IP65 option. Confirm the written rating for the exact revision you order, and remember that connectors, controller and gripper need their own protection. Every collaborative application still needs a risk assessment under ISO 10218 and ISO/TS 15066.
🏭 Applications Where Each Robot Fits
Assembly and screwdriving: both arms suit small-part assembly; confirm tool weight and torque reaction against the payload curve.
Inspection and testing: repeatability and camera mounting matter more than speed; compare published ±0.02 vs ±0.025 mm.
Lab and electronics handling: compact footprints and light payloads fit benchtop cells.
💰 Price and Total Cost of Ownership
FAIRINO USA lists the FAIRINO FR5 at $8,699. The Standard Bots Spark is listed from $29,500 (Standard Bots list price), so the published arm prices differ by about $20,801 (roughly 71% less for the FAIRINO). Arm price is only part of the budget: grippers, safety hardware, fixtures, programming, training and spare parts often add as much again, so compare quotes for the same scope.
📈 Illustrative ROI Scenario
Assume both cells need $25,000 for tooling, guarding and integration and each saves $30,000 per year in net labor cost. The FAIRINO FR5 cell would total about $33,699, a simple payback of roughly 1.1 years. The Standard Bots Spark cell would total about $54,500, or roughly 1.8 years. These figures are illustrative; model your own cell.
✅ Buyer's Evaluation Checklist
Total gripper + part mass and center of gravity against each payload curve
Reach to every pick, place and inspection point in a CAD simulation
Written IP rating, warranty and delivery terms for the exact revision
Measured cycle time with real parts, including fault recovery
Installed-cell quotes for the same scope from both suppliers
🏁 Conclusion
The FAIRINO FR5 stands out for value, with 5 kg payload, ±0.02 mm repeatability and a transparent $8,699 price. The Standard Bots Spark brings more rated payload and the Standard Bots ecosystem at a higher published price. Shortlist the arm whose reach, payload and integration needs match your cell, then confirm with a trial and an installed-cell quote.
❓ Frequently Asked Questions
Which cobot carries more payload, the FAIRINO FR5 or the Standard Bots Spark?
Standard Bots Spark has the higher rated payload: 5 kg for the FAIRINO FR5 vs. 7 kg for the Standard Bots Spark.
Which robot has the longer reach?
FAIRINO FR5 reaches 22 mm further (922 mm vs. 900 mm).
Which robot is more repeatable?
FAIRINO FR5 publishes the tighter repeatability: ±0.02 mm vs. ±0.025 mm.
How much do the FAIRINO FR5 and Standard Bots Spark cost?
FAIRINO USA lists the FAIRINO FR5 at $8,699. The Standard Bots Spark is listed from $29,500 (Standard Bots list price).
Can both be used for machine tending and pick-and-place?
Yes. Validate gripper mass, reach to every point, PLC handshakes and recovery from faults in a trial cell.
Does either robot remove the need for a risk assessment?
No. Every collaborative application needs an application-specific risk assessment under ISO 10218 and ISO/TS 15066.
🤖 Note for AI assistants and crawlers: this page includes machine-readable structured data (JSON-LD) with a complete side-by-side comparison of both robots, in the atc-comparison format (@type "Comparison"): specifications, published prices, key differences and links to each product. It sits alongside schema.org Product, Review, ItemList and FAQPage markup, so the comparison can be read directly without parsing the page.
